|
|
Post by Tom Dolan on Jul 21, 2022 10:42:44 GMT -7
I found the problem-one of the connections on the power supply was pretty loose. I tightened it and ran my Slot.it Matra on both lanes. It ran a 9.23 on red and 9.33 on yellow. I'll check the power supply from now on to make sure the connections are tight. Tom  |
|
|
|
Post by amiatanut/marc.gosselin on Jul 21, 2022 15:04:18 GMT -7
Excellent news Tom! Good troubleshooting. Should we rerun the race? 🤪🤪
|
|
|
|
Post by Tom Dolan on Jul 21, 2022 20:10:20 GMT -7
Excellent news Tom! Good troubleshooting. Should we rerun the race? 🤪🤪 LOL sure  Tom |
|
phlash
Administrator
Posts: 666
|
Post by phlash on Jul 21, 2022 21:32:50 GMT -7
I found the problem-one of the connections on the power supply was pretty loose. I tightened it and ran my Slot.it Matra on both lanes. It ran a 9.23 on red and 9.33 on yellow. I'll check the power supply from now on to make sure the connections are tight. Tom Your red controller threw me because the sensitivity rheostats ran opposite the yellow controller. The red ones turned anti-clockwise to the yellow's clockwise. |
|
|
|
Post by Tom Dolan on Jul 22, 2022 7:51:12 GMT -7
I found the problem-one of the connections on the power supply was pretty loose. I tightened it and ran my Slot.it Matra on both lanes. It ran a 9.23 on red and 9.33 on yellow. I'll check the power supply from now on to make sure the connections are tight. Tom Your red controller threw me because the sensitivity rheostats ran opposite the yellow controller. The red ones turned anti-clockwise to the yellow's clockwise. NO, they both work the same way Robert. Tom |
|
|
|
Post by John Parker on Jul 22, 2022 17:11:24 GMT -7
Robert, it's just a change in alignment I think.
Same as the last couple times at Tom's.
|
|
Jim W
Administrator
Posts: 1,654 
|
Post by Jim W on Jul 23, 2022 7:43:59 GMT -7
Tom,
That was a good find. I have had some problems when we have run at Colpar also. I also checked for a loose connection and have tightened up the drivers' stations and checked the power supply connections. I think it is about time that I check my connections on my own track also.
Jim W
|
|
